The most popular front door choice in the UK
Composite doors are the most popular front door choice in the UK and have been for over a decade. The combination of strength, security, low maintenance, thermal performance and design flexibility make them a practical alternative to timber and uPVC for many family homes.
We supply and fit composite front doors within an 50 mile radius of our Rushden showroom, with the full range of colours, glazing options and Ultion 3-Star security locking included as standard.
Composite doors are built from multiple materials bonded together, hence the name. This type of door typically has a GRP (glass-reinforced polymer) outer skin, a foam-insulated core, a reinforced timber sub-frame and a multi-point locking system.
The GRP skin gives composite front doors their resistance to weather, fading and impact damage. The foam core delivers the thermal performance. The timber sub-frame gives the structural strength for the lock mechanisms and hinges.
Compared with uPVC alternatives, composite front doors can offer greater strength and better thermal insulation. Unlike timber, composite designs are far less prone to warping or splitting and require less routine maintenance. Compared with hybrid systems, composite is generally more affordable while still offering strong security and weather performance.
Every composite door we supply comes with Ultion 3-Star anti-snap cylinders as standard. The Ultion cylinder is the highest-rated residential cylinder available in the UK, with TS 007 3-Star certification and Sold Secure Diamond rating.
The full security spec on our composite doors includes Ultion 3-Star cylinders, Winkhaus or Yale multi-point hook locking, reinforced hinges, anti-bump pins, and PAS 24 doorset certification available as an upgrade.
Secured by Design (the UK Police-backed certification) is available across the composite range for properties where the highest residential security spec is the priority.
Our composite doors achieve U-values from 0.86 W/m²K, which is well below the 1.4 W/m²K minimum required for new front door installations under current UK Building Regulations.
The foam-insulated core does most of the thermal work. The GRP skin reduces air infiltration. The multi-point locking compresses the door against EPDM weather seals around the frame, eliminating draughts at the perimeter.
For exposed front elevations and older properties where heat loss is already higher, the thermal improvement from upgrading to a modern composite front door is usually noticeable in the first winter.
Our range includes panel designs to suit a wide variety of UK property styles. Popular options include:
Each style is available in the full RAL colour palette, with dual-colour finishes giving you different shades inside and out.
The most-requested composite front door colours are anthracite grey, classic black, chartwell green, Oxford blue, traditional red and warm white. The full RAL palette is available, plus dual-colour interior and exterior finishes.
For the full colour palette and matching guidance, see our door colours page.
These doors work particularly well with decorative and privacy glass because the panel inserts are designed into the GRP construction.
The full Pilkington Texture range is available across composite doors, including Stippolyte, Contora and Cotswold patterns at privacy levels 1 to 5. Pilkington Oriel etched glass works for contemporary composite designs. Laminated security glass is available across all decorative patterns for properties where decorative glazing and security both matter.
For the full glass range, see our glass range page.
If you’re looking for composite doors in Northamptonshire or the surrounding counties, you can visit our Rushden showroom to compare full-size designs in person. We supply and install composite front doors within a 50-mile radius, covering Northampton, Bedford, Milton Keynes, Kettering, Cambridge, Peterborough, Rugby, Hemel Hempstead and surrounding areas.
Outside the 80 km installation area, we offer UK-wide supply-only delivery for trade installers and self-build projects. We regularly receive enquiries from Wellingborough, Corby, Higham Ferrers, Raunds, Towcester, St Neots and Daventry, all within our standard fitting area.
Most made-to-measure front doors take around 5 to 8 weeks for delivery and fitting, depending on colour and glazing spec. Standard colours and patterns deliver at the shorter end of the range. Custom RAL colours, decorative leaded glass and Secured by Design upgrades push lead times longer.
Installation is typically a one-day job. Our FENSA-registered installers handle the survey, removal of the old door, frame fitting, weather sealing and final commissioning of the new composite door. The FENSA certificate is issued at handover.
Composite doors come with a 10-year guarantee covering the door slab, frame, sealed glass units, hardware finish and our workmanship on site. Manufacturer warranties on key components like the Ultion 3-Star cylinder run for the lifetime of the product subject to the manufacturer’s terms.
They are external products made from several materials bonded together for strength, insulation and security. A typical construction combines a GRP outer skin, an insulated core, a reinforced sub-frame and multi-point locking. This makes composite a popular choice for front entrances across a wide range of UK homes.
Fitted composite models typically cost around £1,200 to £2,000, while supply-only options start from approximately £750. Premium specifications with upgraded security, decorative glazing, dual-colour finishes or custom colours can reach £2,500 to £3,500. The final price depends on size, glass, finish and hardware.
Yes, when properly specified and fitted. Our range includes Ultion 3-Star anti-snap cylinders, multi-point hook locking and reinforced hardware. PAS 24 and Secured by Design options are also available on suitable configurations for additional security.
There is no fixed service life, as longevity depends on installation, use, exposure and maintenance. GRP finishes are designed to withstand everyday weather conditions with relatively little upkeep, while hinges, locks and seals should be checked and maintained over time to keep everything working correctly.
It depends on your priorities. Composite designs generally offer a more substantial construction, strong thermal performance and a wider choice of traditional front entrance styles. uPVC is usually more affordable and remains a practical option for back entrances or budget-led projects.
It depends on the manufacturer and original finish. Some GRP surfaces can be refinished with suitable preparation and products, but painting may affect the manufacturer's warranty or long-term appearance. Check the product guidance before changing the original colour.
Our Rushden showroom serves homeowners across Northamptonshire and the surrounding area. We supply and install within a 50-mile radius, covering locations including Northampton, Bedford, Kettering, Milton Keynes, Peterborough, Corby and surrounding towns. You can also visit the showroom to compare full-size designs, colours, glazing and hardware in person.
Ultion 3-Star is a high-security cylinder designed to resist common attack methods such as snapping, drilling, picking and bumping. It carries TS 007 3-Star certification, and our composite range includes Ultion 3-Star security as standard.
Get a Quote
By submitting your information, you consent to being contacted in accordance with our privacy policy.
Kickstart
Your Project Today...
Book your free quotation appointment with one of our local expert consultants who will:
Take advantage of our free consultation to understand how we can assist you.
Please fill in the following submission form to schedule your appointment. Upon receiving your form, our team will reach out to you to confirm the details of the appointment.
Thank you for considering our services.
We look forward to hearing from you!
By submitting your information, you consent to being contacted in accordance with our privacy policy.
Homeefe Limited is a private limited company registered in England and Wales, company number: 12754601. Registered office is located at: 17 The Precinct, High Street South, Rushden, Northamptonshire, England, NN10 0QU
Copyright © 2026 Homeefe Limited
By submitting your information, you consent to being contacted in accordance with our privacy policy.
